A SERVICE OF

logo

Adjustment Using the Menus
18
MARKER SELECT
CENTER MARKER
SAFETY AREA
MARKER LEVEL
REMOTE
PARALLEL REMOTE
1PIN
2PIN
3PIN
4PIN
6PIN
7PIN
8PIN
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status
of the unit. The following items are displayed:
For the video input
Signal format
Color temperature
Gamma
Component level
•NTSC setup
RGB/Component select
Scan mode
Model name and serial number
•Option
For the DVI input
Signal format
•fH
•fV
Color temperature
Model name and serial number
•Option
COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the
picture white balance.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konica Minolta color analyzer CA-210
FORMAT xxxxxxxxx
xxxxxxxx
COLOR TEMP xxx
GAMMA xx
COMPONENT LEVEL xxxxx
NTSC SETUP x
RGB/COMP SEL xx
SCAN MODE xxxxxxxx
STATUS 1/2
LMD-1510W xxxxxxx
OPTION BKM-320D
STATUS 2/2
Submenu Setting
COLOR TEMP Selects the color temperature from
among HIGH, LOW and USER
setting.
FORMAT xxx
xxxxxxx
fH xxxxxxx
fV xxxxx
COLOR TEMP xxxx
STATUS 1/2
LMD-1510W xxxxxxx
OPTION BKM-320D
STATUS 2/2
COLOR TEMP: xxxxxx
MANUAL ADJUSTMENT
ADJUST GAIN:
ADJUST BIAS:
COPY FROM: xxx
COLOR TEMP/BAL