35
Recording/Playback
1 Turn the POWER switch A until
the (Movie) lamp lights up.
2 Press START/STOP B (or C).
To stop recording, press START/STOP
again.
1 Turn the POWER switch A until
the (Still) lamp lights up.
2
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).
appears next to . When
disappears, the image has been
recorded.
b Notes
• You cannot record still images on a disc.
z Tips
• See page 12 for the recordable time of movies, and page 78 for the number of recordable still images.
• You can record still images by pressing PHOTO F during movie recording (Dual Rec, p. 37).
• appears when [ INDEX SET] is set to [ON] (the default setting) during movie recording (p. 77).
• A frame is shown on the detected face, and the detected face image is sharpened automatically when
[FACE DETECTION] is set to [ON] ( ) (the default setting) (p. 77).
• You can switch recording between movies and still images by touching (HOME) D (or E) t
(CAMERA) t [MOVIE] or [PHOTO].
• You can create still images from recorded movies (p. 50).
Movies
[STBY] t [REC]
Still Images
Flashing t Lights up
Continued ,
