Operating Machine - Page 21
OPERATING MACHINE
Test 5
1. Operator on seat.
2. Push brake pedal (A) down.
Picture Note: Model S2554 used for photo purposes.
3. Push PTO switch (B) down to DISENGAGE.
4. Release forward travel pedal (C) to N (NEUTRAL)
position.
5. Start engine and move throttle lever (D) to FAST (
r
)
speed position.
6. Release brake slowly.
7. Raise up off of seat. DO NOT get off tractor.
8. Engine MUST stop. If engine does not stop, there is a
problem with your safety interlock circuit.
Test 6
1. Operator on seat.
2. Lock the park brake.
Picture Note: Model S2554 used for photo purposes.
3. Push PTO switch (A) down to DISENGAGE.
4. Start engine and move throttle lever (B) to FAST (
r
)
speed position.
5. Raise up off of seat. DO NOT get off tractor.
6. Engine MUST remain running. If engine does stop,
there is a problem with your safety interlock circuit.
Test 7
1. LOCK the park brake (A).
2. Pull out free-wheeling lever.
3. Try to push machine manually.
4. Park brake MUST prevent machine from moving. If
machine moves, parking brake needs to be adjusted.
