Unit 3: PCL Emulation Support
Page 3-2 SATO D512 PCL Programming Manual
PCL SUPPORT
Table 3-1 lists PCL emulation commands and identifies printers that support them.
For detailed information about PCL emulation commands and how to select them, see
“PCL Emulation” on page 1-2.
The section, “GL/2 Commands” on page 1-27 identifies printer support for the GL/2
commands.
Table 3-1: PCL Emulation Commands
Supported
Not Supported
Command
Page numbers reference command descriptions Printer Model
Function Page D512
ESC
E Printer Reset 1-9
ESC
Y Display Functions-On 1-25
ESC
Z Display Functions-Off 1-25
ESC
z Print Test Page 1-25
ESC
&a#C Horizontal Cursor Position (in Columns) 1-13
ESC
&a#G Duplex Page Side Selection 1-12
ESC
&a#H Horizontal Cursor Position (in Decipoints) 1-13
ESC
&a#L Set Left Margin 1-11
ESC
&a#M Set Right Margin 1-11
ESC
&a#P Print Direction 1-11
ESC
&a#R Vertical Cursor Position (in Rows) 1-13
ESC
&a#V Vertical Cursor Position (in Decipoints) 1-13
ESC
&c#T Character Text Path Direction 1-11
ESC
&d@ Underline-Disable 1-15
ESC
&d#A Number of Collated Copies 1-9
ESC
&d#D Underline-Enable 1-15
ESC
&f#F Set Universal Height 1-10
ESC
&f#G Set Universal Width 1-10
ESC
&f#O Set Universal Feed Direction 1-10
ESC
&f#W Set Universal Custom Name 1-10
ESC
&f#S Push / Pop Cursor Position 1-13
ESC
&f#X Macro Control 1-17
ESC
&f#Y Set Macro ID 1-17
ESC
&k#G Set Line Termination 1-13
ESC
&k#H Set Horizontal Motion Index 1-11
