A SERVICE OF

logo

Open as PDF
next previous
Special Notes 1. Characters may be enlarged through the use of the <ESC>L
Character Expansion command.
2. Character spacing may be altered through the use of the <ESC>A
Character Pitch command.
3. A font must be defined for each field to be printed. There is no
default font.
4. The proportionally spaced fonts XU, XS, XM, XL and XB can be
printed with fixed spacing using the <ESC>PS Proportional Space
command.
Page 37 PN 9001092 Rev. A SATO CX208/212 Printers
CX208/212 Programming Guide