8
MENU OPERA
MENU OPERA
TION
TION
■ Program sort.
Use this channel sorting feature to move the channels between two
programme positions. This feature is particularly useful after
automatic tuning.
You have to choose a programme that you wish to move from one
position to another.
1. Select programme position eg. 4.
2. Press the Green button.
3. Select Channel position you would like the channel moved to
eg.7
4. Press the Green button again.
5. Press the MENU button twice to exit.
■ Program Name.
With this feature individual channels may be renamed by using the
1 or 2 and
5 or 6
buttons.
■ Auto sort (auto tuning and sorting)
1. Select Auto sort by using the
5 or 6
button. Press the OK
button to start scan.
2. While Scan is in progress, channel frequencies will be captured
and stored automatically, starting from position one.
■ Skip.
Skip is situated directly beneath Frequency on the screen.
When ‘ON’ it removes access to a channel using the
5 or 6
button. The only way that selected channel can be accessed will be
by
using the numerical keys on the remote control.
To memorise, select ‘memory’ using the 6 button and then press
the F/OK button
■ Memory.
Memory is situated directly beneath Skip on the screen.
This is used to memorise the frequency and skip features. Pressing
the OK button will change the display from ‘OK?’ to ‘OK’ signalling
successful memorisation.
Preset Menu
channel no.
channel no.
Program pos. 6
1 6 11
2 7 12
3 8 13
4 9 14
5 10 15
■ Frequency.
The frequency shown is the current frequency of the channel
selected. (frequency changes during auto sort)
1. Select Frequency by using the 5 or 6 button.
(Refer to the channel table.)
You can either...
a) Enter the frequency using the 0-9 buttons referring to the
channel table.
b) Press and hold the 1 or 2 buttons until the frequency
starts scanning (about 5 seconds), scanning will stop when a
channel is found.
c) Press intermittently to de-tune the frequency if required.
Repeat above until the correct channel is found.
2. Press the 5 or 6 button to select Memory. Press the OK
button to store the new frequency.
Program pos. 6
