6
1. The LCD display will have a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
● To turn the monitor into standby mode, press the
4
button.
The blue power indicator illuminates more brightly.
● To turn the monitor ON from standby mode, press any of the
following buttons:
4
,
5
,
6
or
0-9 buttons.
2. Control buttons (bottom corner of back cover)
Menu/F button: rotate between volume, Brightness, contrast,
colour, sharpness and OSD language
Input/ OK button: switch between TV, AV1,RGB,AV2, HDMI and
PC mode.
ed buttons: Change TV and provide up and down
adjustments.
4 button: To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply).
Many of your monitors functions are controlled through the menu
function, using the remote control handset.
During menu operation the bottom of the on screen display will
show which controls can be used for menu navigation.
Press the MENU button to enter the main menu.
A sub menu is selected using the
5 or 6
button and pressing
the 1 button when the required sub menu is highlighted.
When you have finished you can press the MENU button to exit,
then the MENU button again to exit the main menu.
1. Press the MENU button. Select Picture using the
5 or 6
button. Press the1 button to enter.
Set the picture settings for your “personal” preference.
2. Use the
5 or 6
button to select eg. Brightness and the 1
or 2 button to adjust levels.
3. Preset : You can select either your “Personal” settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by using 1 or 2 to
select between Mid / Max / Auto / Min / OFF.
5. Dynamic skin tone: May be used to enhance skin tone by using
1 or 2 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by using 1 or 2 button
to select between Min / Mid / Max.To exit press the MENU button
twice.
✐ Your personal settings are automatically saved when you exit the
menu.
Controls and Menus
INST
INST
ALLA
ALLA
TION
TION
Dyn. Skin
Program pos.
Preset Personal / Dynamic / Standard / ECO
Dyn. skin tone ON / OFF
