GB
47
GB
46
The FM Simulcast feature enables you to record:
◆ the picture received on the VCR’s tuner ;
and
◆ the sound received from an external source via the
LINE 1 RCA input connectors on the front of the VCR.
Example
: You wish to record a concert transmitted
simultaneously on the television and radio. You can
thus take advantage of FM stereo sound on the radio.
1 Connect an RCA audio cable to the appropriate output on your
sound system (radio for example).
2 Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the front of your VCR.
3 Select the SC Simulcast mode by pressing INPUT one or more
times until SC is displayed.
4 Select the television programme transmitting the pictures.
5 Switch the sound system onto the appropriate radio station.
6
Press the REC button for at least one second when the broadcast
starts.
Result: The sound received on the LINE 1 input is recorded
with the pictures received on the tuner.
7 When you have finished recording, press STOP ( ).
➢ If you wish to view the pictures being recorded:
◆ your VCR must be connected as usual to the
television (see page 12 for further details) ; and
◆ you must select the AV input on the television for use
with your VCR.
Recording an FM Simulcast Programme
7
With the Automatic Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
◆ a CD player ;
◆ a microphone connected to a sound system ; or
◆ a cassette player.
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1 Connect an RCA audio cable to the appropriate output on your
sound system (CD/cassette player for example).
2 Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the front of your VCR.
3 Insert the pre-recorded cassette on which the audio track is to be
replaced.
4 Select the LINE 1 input by pressing INPUT until L1 is displayed.
5
Locate the point on the cassette at which you wish to start dubbing.
6 Press P/STILL ( ).
7 Press A.DUB.
Result
: Your VCR is now in the Audio Dubbing Pause mode.
8 On the sound system, locate the point on the CD or cassette at
which you wish to start playback.
Example: The track that you wish to record on the cassette.
9 Press the pause button on your sound system.
10 When you are ready:
◆ start playback on the sound system ; and
◆ press REC or P/STILL ( ) on the remote control.
Result
:
The soundtrack is replaced on the pre-recorded cassette.
11 When you have finished recording, press STOP ( ).
