GB
29
GB
28
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding or buttons, until the cursor is
placed in front of the USER SET option.
3 Press the
,
button to select user set2 page.
Result
: The USER SET2 menu is displayed.
4 Press the corresponding or buttons, until the cursor is
placed in front of the NICAM option.
5 To... Press or , until...
Mono mode OFF is displayed.
OFF: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6 On completion, press MENU twice to exit the menu.
➢ NICAM is the stereo broadcast system of some countries.
(Ex.: U.K., SPAIN, --)
➢ If the stereo broadcast system of your country is not
NICAM, the SV-5000W can not receive NICAM.
**
USER SET1
**
TAPE SELECT :E180/
T120
CLOCK TYPE :24H
PLAY SYSTEM :AUTO
OSD :ON
❿
USER SET2
#❷
❿
END:(MENU)
**
USER SET2
**
❿
NICAM :ON
COLOR :ON
BLUE SCREEN :ON
SQPB :OFF
USER SET1
#❷
❿
END:(MENU)
Modifying VIDEOPLUS+/SHOWVIEW Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press MENU a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the or buttons, until the PR selection flashes.
than the tuner (L1, L2, AV input)
◆ Press the INPUT button one or more times to change the
input source selection.
Result
: The programme number is replaced by:
➢ The input source must be selected before changing any other
value.
Record a programme every day ◆ Press the or buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time
◆ Press the or buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the or buttons, until the DAY selection flashes.
on the same day and at the same time
◆ Press the or buttons, until the W- (Week) value is
displayed, followed by the required day.
Example
: W-SA (Weekly Saturday)
Extend the recording time ◆ Press the or buttons, until the STOP selection flashes.
◆ Press the or buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the or buttons, until the recording speed selection
flashes.
◆ Press the or buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select)
• SP (Standard Play)
• LP (Long Play)
• SLP (Super Long Play)
Select the VPS/PDC recording ◆ Press the or buttons, until the V/P selection flashes.
◆ Press the or buttons until the
“ON” indication is
display.
☛
Do not select VPS/PDC unless you are sure the programme
you wish to record is broadcast with VPS/PDC. If you do set
VPS/PDC ON (by selecting “ON” in the right - hand column on
the screen), then you must set up the start-time EXACTLY
according to the published TV schedule. Otherwise the timer
recording won’t take place.
