Maintaining Your Machine
195
6
Maintaining Your Machine
To maintain high print quality, clean
the following parts and units regular-
ly.
❖
❖❖
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvent, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Main Frame
Cleaning the exposure glass
A
Lift the platen cover or document
feeder.
B
Clean A
AA
A and B
BB
B.
Cleaning the platen cover
A
Lift the platen cover.
B
Clean the platen cover with a
damp cloth and wipe it with a dry
cloth.
Note
❒ If you do not clean the platen
cover, marks on the cover will
be printed.
Cleaning the paper feed roller (Paper
feed tray)
A
Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
and then wipe it with a dry cloth.
Note
❒ If you do not clean the paper
feed roller, paper misfeeds tend
to occur.
ZDCH130E
AM1P0100
TPEH120E
