Installing the Paper Bank PS430
17
2
C
Remove the screw, knob screw
and lock plate from inside the
packing material.
1.
Screw
2.
Knob Screw (Finger type)
3.
Lock Plate
D
Align the printer over the paper
bank, and then lower it gently
onto the paper bank.
Important
❒
When lifting the printer, pull
out the grips from the front side
of the printer. Hold the front
side grips, and hold the inset
grips on the rear side.
❒
The printer should be held by at
least two people.
E
Push the grips into the printer.
Take out the cover inside the Tray
2 and attach it between the paper
tray and the front cover.
F
Pull the second paper tray (Tray 2)
up until it stops. After that, lift it
slightly, then pull it out.
G
Pull out the first paper tray (Tray
1) , and take the screwdriver (
A
)
from the tray.
Note
❒
Be sure to return the screwdriv-
er to the paper tray after using
it.
1
2
3
TAPD011E
TAPP021E
TAPH120E
TAPP040E
TAPH210E
TAPP720E
