U
sed along with the Clock fea-
ture, you can select a specific
time the television will turn on
when the Timer Active control is
turned ON.
Press the CLOCK button to
display the Clock onscreen menu.
Press the CURSOR CURSOR
DOWN ▼ button until the words
START TIME are highlighted.
Enter the time to turn on the
TV using the NUMBERED but-
tons. If the first number is a single
digit first enter a zero then the digit
(i.e., press “0”, then press “8”).
Press the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ buttons to
set either AM or PM time.
SETTING A START UP TIME
Remember: Be sure to set
the Timer Active control to ON.
After a start up channel has been
entered in the CHANNEL control
and the TIMER ACTIVE control is
set to ON, whenever the CLOCK
button on the remote is pressed, the
TV will change to that Start Up
Channel.
The onscreen menu will time out
and disappear from the screen when
you finish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
SMART HELP
