T
he CABLE feature allows you to
change the TV’s signal input by
turning the “Cable Mode” ON or
OFF. It’s important for the TV to
know what type of signal, either a
Cable TV signal or a normal
Antenna signal, is to be used.
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word
CABLE is highlighted.
Press the CURSOR RIGHT ᮣ
button to turn the CABLE mode
ON or OFF.
SETTING THE CABLE (TUNING) CONTROL
If you have a CABLE sig-
nal coming into the TV set the
CABLE control to YES. When
CABLE is ON, channels 1-125 are
available.
If you have an ANTENNA signal
coming into the TV set the CABLE
control to NO. When CABLE is OFF
only channels 2-69 are available.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
SMART HELP
