English
28 OPERATION - AUDIO
Shuffle
● Press SHUFFLE during play.
➤ The tracks will be played in random order.
● To return to normal play, press SHUFFLE again.
Repeat track/disc
● To repeat the currently-playing track, press
REPEAT.
➤ REPEAT TRACK will appear on the display.
● To repeat the entire disc, press REPEAT a second
time.
➤ REPEAT ALL will appear on the display.
● To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat or loop a sequence:
● Press REPEAT A-B at your chosen starting point;
➤ A will appear on the player display.
● Press REPEAT A-B again at your chosen end
point;
➤ A-B will appear on the display, and the repeat
sequence will begin.
● To exit from the sequence, press REPEAT A-B
again.
Scan
Plays the first 10 seconds of each track on the disc.
● Press SCAN.
● To continue play at your chosen track, press SCAN
again or press 2 PLAY.
FTS (Favorite Track Selection)
- Audio CD only
- The FTS feature allows you to store your favorite
tracks for a particular disc in the player memory.
- Each FTS program can contain up to 20 tracks.
- Each time an FTS program is played it will be placed at
top of the list. When the list is full and a new program is
added, the last program on the list will be removed from
the list.
- The selections can be called up and played at any time.
- For storing an FTS program, On-screen Display
operation is required.
Storing an FTS program
1 Load a disc and go to Stop mode.
2 Use w (down cursor) to go to the list of available
tracks.
3 Use t and u (left/right cursor) to select tracks from
the list.
To go directly to any track, enter the track number
using the numeric keys 0-9.
4 Store each track by pressing OK.
➤ The track numbers will be added to the list of
selected tracks.
➤ The number of tracks and the playing time of the
program will be shown on the player display and the
audio screen.
When your FTS program is complete, press 2 PLAY to
start play; the FTS program will be automatically
memorized.
● Press FTS or use the tu(left/right cursor) to set
FTS to ON or OFF.
Erasing a track from an FTS-program
1 Use w (down cursor) to go to the list of selected
tracks.
2 Use t and u (left/right cursor) to select the track
number you wish to erase. To go directly to any
track, enter the track number using the numeric
keys 0-9.
3 Press OK.
➤ The track number will be erased from the list of
selected tracks.
Erasing the complete program
● Use w (down cursor) to select
Clear All
and press
OK.
➤ The complete FTS program for the disc will be
erased.
stop
stereo track
time
total tracks
Audio Disk Mode
track 1 2 3 4 5 6 7 8
program
Clear all
fts On Off
CD 8 10321
total time
stop
01_SACD1000_USA_23811_D1 11-12-2000 16:14 Pagina 28
