Editing: Disc Information Screen 47
You can change Disc settings for a DVD+RW from the Disc Information
Screen.
1
When in the Index Picture Screen, press STOP C to select
the first Title on the DVD+RW.
2
Press 8 to enter the Disc Information Screen.
3
In the Disc Information Screen, press : to enter the Settings
menu.
4
Press 89 to select Disc name, Protection, Erase Disc, or
Make edits compatible. Proceed as follows, depending on
which feature you want to adjust.
●
D
isc name
Press :. Press ;: to choose the character position, then
press 89 to enter a character. Press SELECT to alternate
between capital and lower case characters. Press CLEAR to erase a
character (the space will remain). A name may contain a maximum of
64 characters.
To return to the Settings menu, press ;, repeatedly if necessary.
“Storing name” will appear briefly.
●
Protection
Press :. Press 89 to select Protected or Unprotected, then
press OK. If you protect the Disc, y
ou can not make any
further
changes to the Disc, including recording. “Disc locked” will appear on
the TV screen briefly if you attempt recording. Choosing Protected
also disables most editing features.
To edit or record again, select Unprotected.
●
Erase disc
Press OK.
“This will erase all titles Press OK to confirm” will appear.
Press OK again to begin erasing. (If you decide not to erase the
Disc, press ;.) “Erasing disc” appears until erasing is complete. When
the Disc is erased, the Index Picture Screen will reappear, showing the
free space on the Disc.
● Make edits compatible
This option appears only if the current DVD+RW is not compatible
with other DVD Players. After choosing Make edits compatible,
press OK. “This will take XX” and “Press OK to confirm” will appear
to indicate how long the action will take.
Press OK again. “Working ..” and a progress bar will appear until
the action is complete.
5
Press ; when you are finished and want to return to the Disc
Information Screen.
