The Title Settings Menu lets you rename a Title that you have recorded
onto a DVD+RW. From the same menu, you can also play the entire
selected Title or erase the chosen Title from the DVD+RW.
1
When playback is stopped and a DVD+RW is in the DVD
Recorder, the Index Picture Screen will appear automatically.
Details are on page 35.
2
Press 89 to select the Index Picture of the Title you want
to name, play, or erase, then press :. The Title settings menu
will appear.
3
Press 89 to select Name, Play full title, or Erase this title,
then continue as directed for each option in step 4.
4
●
Name
Press :. The first character of the Title name will be selected.
Press 89 to change the character.
Press SELECT to switch between upper and lower case letters.
Press CLEAR to erase a character. To move to the next or previous
character, press ;:. Repeat this process until you have finished
naming the Title.
When the Title is complete, press OK.
●
Play full title
Press OK. The Title you selected will begin to play from its begin-
ning.
●
Erase this title
Press OK. The DVD Recorder will ask you to confirm that you
really want to erase the entire Title. Press OK again to start
erasing the Title. “Erasing title” will appear during erasure. When
erasing is complete, the Index Picture Screen will reappear.
(If you do not want to erase the Title, press ; to return to the
Title Settings menu.)
5
Press
;
to return to the Index Picture Screen if necessary.
