21
Select a play source
On the main unit
Press • SOURCE repeatedly to select: DISC
> IPOD > RADIO FM > COAXIAL INPUT
> OPTICAL INPUT > SCART INPUT >
AUX 1 INPUT > AUX2 INPUT > AUX3
INPUT > MP3 LINK > USB > DISC ...
On the remote control
Press • iPod DOCK to switch to dock mode.
Press • AUDIO SOURCE repeatedly to
switch to the connected audio source:
Display Device connected to
SCART INPUT SCART jack
AUX1 INPUT AUDIO IN-AUX1 jacks
AUX2 INPUT AUDIO IN-AUX2 jacks
AUX3 INPUT AUDIO IN-AUX3 jacks
COAXIAL
INPUT
DIGITAL IN-COAXIAL
jack
OPTICAL
INPUT
DIGITAL IN-OPTICAL jack
MP3 LINK MP3 LINK jack
Press • RADIO to switch to FM band.
Press • USB to switch to USB mode.
Press • DISC to switch to disc mode.
5 Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
Once complete, audio input mapping »
menu is displayed.
6 Select the audio input of this Home
Theater System that is used to connect to
other HDMI device, then press
.
For example, if the TV audio is •
connected to the AUX1 jack on this
Home Theater System, select [Aux1
Input] and map with the TV (brand
name) at the right panel.
7 Select the correct connected device, then
press OK .
Repeat steps 5~7 to map other »
connected devices.
8 Press SETUP to exit the menu.
Aux1 Input
Coaxial Input
Optical Input
Audio Input Mapping
SCART Input
[TV]
other(non-HDMI)
[DVD 3400]
Aux2 Input
Aux3 Input
English
EN
