10
Option 3: Connect to the component
video jack
1 Connect the component video cable to
the COMPONENT VIDEO OUT jack
on this Home Theater System and the
COMPONENT VIDEO input jack on the
TV.
If a progressive scan TV is used, you •
may turn on the progressive scan
mode .
Note
The component video input jack on the TV •
might be labeled as Y Pb Pr , Y Cb Cr or YUV .
This type of connection provides good picture
•
quality.
COMPONENT
VIDEO OUT
Option2: Connect to the SCART jack
1 Connect a scart cable to the SCART jack
on this Home Theater System and the
SCART input jack on the TV.
Note
Scart connection allows TV’s audio output •
through the speakers. Press AUDIO SOURCE
repeatedly until ‘SCART INPUT’ is displayed
on the display panel.
This type of connection provides good picture
•
quality.
SCART
SCART
EN
