3
System operation
1. Record operation
Record operation can be divided into Manual, Auto, Alert, Motion detect,
and the combination operation of above.
Manual
l “ record setting”, Press button “quantity” .
l press “=” start record, 4-channel start record at the same time,
the mark of record appear on the VFD and monitor.
l manual belong to the normal record.
l Press “=” stop manual record.
Alert Record
l The parameter in" the alert records image the enactment".( the
related system setting chapter for details see)
l Press "guard" make the system be placed in the warning.
l The alert record can start with motion and detect. If you want to
use this function, please choose the window of “motion and detect”
on the list in advance, and setting “alert”. .
l The alert record can stop after press “record” button only.
l The length of alert record is confirmed by “TIME BEFORE” “TIME
AFTER”.
l While recording, there is a red signal on the left of VFD and
monitor. The buzzer won’t stop until press “clear”.
Motion Detect
l Setting the parameter in” Motion Detect” column.
l Starting the detect record must press the “guard” before, but there
is any other operation before the normal detect record.
l The time of normal detect is decided by “record time” in motion
setting; the time of alert record is decided by “alert record setting” in
“before/after alert”.
Scheduling record
l Setting the parameter of scheduling record in "the setting
scheduling" column.
l Press" scheduling" on the front panel, the signal “¹ ” will show on
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
