12
English
3139 246 14221
8 Proceed to page 24 to continue the first
installation.
IMPORTANT!
– The progressive scan video quality
is only available through Y Pb Pr
connection and a progressive TV is
required. Turn on the progressive
scan feature after complete the first
installation (see page 61.)
– Before enabling the progressive
scan function, you must ensure that
your TV progressive scan function is
turned on (refer to your TV owner’s
manual.)
Helpful Hint:
– To switch between interlaced and
progressive scan output, press and hold
∞
while reconnect its ~ MAINS to the power
supply. The display panel will show
“Progressive Scan” if the progressive scan
function is enabled.
Connecting to TV (cont’d)
DVDR610_615_37_Engfinal434 8/16/04, 4:04 PM12
