6
EN
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a purchased or
rented decoder.You can connect such a decoder
to this TV-Video Combi. The following function
will automatically activate the connected decoder
for the desired TV channel.
1.
1.Use or to select the programme
number which you would like to allocate the
decoder to.
2.
2.Press .The main menu will appear.
3.
3.Use or to select ‘TUNER
SET UP’.Then press .
4.
4.Use or to select ‘MANU-
AL TUNING’.Then press .
5.
5.
Use
or
to select
‘DECODER’.
6.
6.Use to select ‘ON’(Decoder
switched on).
7.
7.
To end, press .
The decoder has now been allocated to this pro-
gramme number.
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing or coded TV chan-
nels must be searched for and stored manually.
1.
1.Press .The main menu will appear.
2.
2.Use or to select ‘TUNER
SET UP’.Then press .
3.
3.Use or to select ‘MANUAL
TUNING’.Then press .
4.
4.Select ‘PROG.’ with or
.
Then
press .
5.
5.With or
or
, select
the desired programme number that you want
to use for the TV channel, e.g.‘P01’. Then
press .
6.
6.Select ‘CHANNEL’ with or
, and confirm with .Then enter the
desired channel with
.
If you set
‘
SKIP
’
on for a channel, this channel
will be ignored when going through the channels
with .
7.
7.Save the TV channel with .
8.
8.
To search for other TV channels, start again at step 4.
9.
9.To end, press
.
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket EXT1/ AV1.
To do this, select the channel number ‘AV1’ by
pressing 0,0,1, with the keys on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are re-installing the TV-Video
Combi, e.g. after moving house, you can start
this procedure again.This will replace all the TV
channels already saved with the new ones.
0..9
STATUS/EXIT
FWD 1- B
P–
P
+
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
0..9
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STATUS/EXIT
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-L
PLAY B-K
MENU
0..9
P
-
P
+
Satellite receiver
If you are connecting a satellite receiver, please
read the section ‘Using the satellite receiver’.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
MANUAL TUNING
PROG. P55
CHANNEL 055
→DECODER [OFF]
SKIP [OFF]
SELECT KL CHOOSE B
END=EXIT
How can I switch off the decoder?
Use to select ‘OFF’(Decoder
switched off).
FWD 1- B
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT KL CHOOSE B
END=EXIT
I don’t know the channels for my TV stations
In this case, press or in
‘CHANNEL’ to start the automatic channel search.
A changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
STOP C-LPLAY B-K
T6450EZ(EN)_UKX.qx3 04.2.12 9:23 PM Page 8
