Customizing V.35-Compatible Units
5-5
7924-A2-GB20-30
October 1997
Displaying Switchpack Definitions
Enter 4 at the Config prompt to display the definition of each position in the two
switchpacks. Switchpack definitions are also listed in Appendix C,
Switchpacks
and Jumpers
.
Config→ 4
Switch pack 1 definition:
1 – CO/CP OFF=CP, ON=CO
2 – Dual/Single Loop Mode OFF=Dual, ON=Single
3 – Not Used
4,5 – 00, 11 Invalid
01 = Invalid, 10 = Loop Timing
6–8 – Not Used
Switch pack 2 definition:
1 – 64 Kbps (1x64) OFF=0, ON=1
2 – 128 Kbps (2x64) OFF=0, ON=1
3 – 192 Kbps (3x64) OFF=0, ON=1
4 – 256 Kbps (4x64) OFF=0, ON=1
5 – 384 Kbps (6x64) OFF=0, ON=1
6 – 512 Kbps (8x64) OFF=0, ON=1
7 – 768 Kbps (12x64) OFF=0, ON=1
8 – 1024 Kbps (16x64) OFF=0, ON=1
All switches off = 1536 Kbps (24x64)
Config→
