5
Table 1. Port Configuration Options (2 of 2)
Option Comments/DescriptionFactory 2Factory 1
10E–4 10E–4
10E–5 10E–5
Err Rate:
10E–6 10E–6
Selects the error rate threshold for
Excessive Error Rate Alarm
(Excessive Error
Rate)
10E–7 10E–7
Excessive Error Rate Alarm.
10E–8 10E–8
10E–9 10E–9
Table 2. Network Interface Configuration Options
Option Factory 1 Factory 2 Comments/Description
D4 D4
Selects D4 or ESF framing format
NET Framing:
ESF ESF
Selects D4 or ESF framing format.
AMI AMI
Selects AMI or B8ZS line coding
NET Coding:
B8ZS B8ZS
format.
0.0 0.0
–7.5 –7.5
Provides Line Build Out in dB
LBO:
–15 –15
Provides Line Build Out in dB.
–22.5 –22.5
Enab Enab
Sends ANSI Performance Report
ANSI PRM:
Disab Disab
Messages.
Disab Disab
Specifies whether the FDL’s
Mgmt Link:
SNMP SNMP
Management Link is enabled.
Enab Enab
Network-initiated LLB allows LLB to
NET LLB:
Disab Disab
be controlled by inband LLB codes.
Enab Enab Network-initiated PLB allows PLB
to be controlled by FDL PLB
NET PLB:
Disab Disab
to be controlled by FDL PLB
messages.
62411 62411
Provides enforcement of ones
BitStuff:
Part68 Part68
Provides enforcement of ones
density protection per AT&T TR
62411
ANSI T1-403
and FCC
Disab Disab
,
-
, an
Part 68 Technical Publication.
Circuit Ident:
Edit Edit
Specifies the transmission vendor’s
Clear Clear
circuit identifier.
