A SERVICE OF

logo

Open as PDF
next previous
14
Table 7. Management – General Configuration Options (2 of 2)
Option Comments/DescriptionFactory 2Factory 1
Com NetMask:
Edit Edit
The Subnet Mask needed to
access the device when the COM
Com NetMask:
Clear Clear
access the device when the COM
port is configured for SNMP.
Com Link:
PPP PPP
The link layer protocol for the COM
Com Link:
SLIP SLIP
The
link
layer
protocol
for
the
COM
port when configured for SNMP.
Modem IP Adr:
Edit Edit
Specifies the IP address for the
MODEM port when configured for
Modem IP Adr:
Clear Clear
p
MODEM port when configured for
SNMP.
Mdm NetMask:
Edit Edit
Specifies the Subnet Mask needed
to access the device when the
Mdm NetMask:
Clear Clear
to
access
the
device
when
the
MODEM port is configured for
SNMP.
Alt Mdm IP Adr:
Edit Edit
Specifies the alternate IP address
for the MODEM port when
Alt Mdm IP Adr:
Clear Clear
p
for the MODEM port when
configured for SNMP.
Alt Mdm NetMask:
Edit Edit
Specifies the alternate modem
Subnet Mask needed to access the
Alt Mdm NetMask:
Clear Clear
Subnet
Mask
needed
to
access
the
device when the MODEM port is
configured for SNMP.
Modem Link:
PPP PPP Specifies the link layer protocol for
the MODEM port when configured
Modem Link:
SLIP SLIP
pyp
the MODEM port when configured
for SNMP.
None None
Def Netwk:
Com Com
S
p
ecifies the default network
Def Netwk:
Modem Modem
S
pec
ifi
es
th
e
d
e
f
au
lt
ne
t
wor
k
destination.
FDL FDL