![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/b7/8b75fec5-0cb7-42e0-ace7-83d20b5c131b/8b75fec5-0cb7-42e0-ace7-83d20b5c131b-bg11.png)
Reference Manual for the Broadband Voice Adapter TA612V
Introduction 2-5
202-10037-01, March 2005
– Application Notes and other helpful information.
• Support Registration card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the router for repair.
The Router’s Front Panel
The front panel of the TA612V adapter contains these status indicators.
Figure 2-1: TA612V Front Panel
Viewed from left to right, the table below describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity Description
Power On Green Solid
Off
Power is supplied to the router.
Power is not supplied to the router.
Test Blinking
Off
The router is performing its diagnostic test.
The router successfully completed its diagnostic test.
Internet
Port
On
Blink
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LAN Port Green
Amber
Blink
The LAN port has detected a 100 Mbps link with an attached device.
The LAN port has detected a 10 Mbps link with an attached device.
Data is being transmitted or received by the LAN port.
Phone
Ports
Off
On
Blink
The phone port has not yet been provisioned by the service provider.
The phone port has been provisioned by the service provider.
There is a voice message waiting.
Power Test Internet Port LAN Port Phone Ports 1 & 2