Chapter 4: Operating System Recovery 4-3
3. Apply power to the terminal so the CD-ROM drive can be opened.
4. Insert the CD that contains the operating system image.
7454
Model Software CD LPINs
Win2000 WinXPe WinNT Win98 Win95 DOS
*22xx D370-0489-0100 Not Supported D370-0433-0100 D370-0444-0100 D370-0442-0100 D370-0445-0100
32xx D370-0516-0100 D370-0565-0100 D370-0501-0100 D370-0500-0100 D370-0503-0100
**Controlled
D370-0445-0100
34xx,
35xx,
36xx,
37xx
D370-0516-0100 D370-0565-0100 D370-0501-0100 D370-0500-0100 **Discontinued D370-0445-0100
Note: * The 22xx models have been discontinued. Contact NCR
Product Manager for LPIN availability.
** Contact Product Manager for Controlled Delivery support of
Windows 95 LPIN for 32xx model.
5. Boot the terminal.
6. Press
F2 at the screen prompt to enter Setup.
7. Press
F9 to set BIOS System defaults.
8. In the
Advanced menu, select I/O Device Configuration.
9. Verify that the
LPT 1 Mode is set to ECP.
10. Go back to the Advanced menu, select Multiple ROM Menu.
11. Set the
Parallel CD-ROM Boot to Enabled.
12. Set all other
Boot options to Disabled.
13. Exit Setup and Save Changes.
As the terminal reboots, you should see a message during boot
indicating that the CD-ROM has been recognized:
Micro Solutions BACKPACK CD-ROM v0.3
. . .
Booting from BACKPACK CD
Starting MS-DOS
