A SERVICE OF

logo

Open as PDF
next previous
8
MECHANICAL SERVICE
2.0 - ACCESSING THE CONSOLE FOR
PROGRAMMING
Tools Needed:
• Phillips head screw driver
2-1: Turn off the unit.
2-2: Remove six (6) screws (P/N - SM41271) from back
side of console to remove cover and gain access for
programming (see Figure 2-1 and Figure 2-2).
2-3: Attach FISP connector for software programming to
this connection (see Figure 2-3).
2-4: Turn on the unit.
2-5: The LED on the FISP will blink momentarily, then stay
on solid.
2-6: Turn off the unit.
2-7: Remove FISP connector, replace cover and reattach
with six (6) screws (P/N - SM41271).
Figure 2-2:
Exposed console circuit board.
Figure 2-1
3 screws per side
Figure 2-3