A SERVICE OF

logo

Open as PDF
next previous
24
MECHANICAL SERVICE
10.0 - REPLACEMENT OF PIVOT COVERS
Parts Affected:
• Right Pivot Cover - P/N 17660
• Left Pivot Cover - P/N 17661
Tools Needed:
See Figure 1 for Steps 10-1 thru 10-4.
10-1: Remove Rear Step (P/N -17733) and Step Plate (P/N - 17591).
10-2: Remove Rear Plastic Cover (P/N - 17659).
10-3: Remove right Treadle Cover (P/N - SM17731 and P/N - SM17666), then remove the left Treadle Cover (P/N - SM17332
and P/N - 17667).
10-4: Remove right and left Upright Lower Plastic Pivot Covers (P/N - SM17657 and P/N - 17578).
Figure 1
Rear Step
Rear Plastic Cover
Lower Plastic Cover
Lower Plastic Cover
Treadle Top Cover
Treadle Top Cover
Upright Attachment
Bolts
• 3/16 Allen Wrench
• 5/32 Allen
• 1/8 Allen
• Phillips Screwdriver
• 3/4 inch Socket
• 3/4 inch Wrench or Open Ended Wrench
• Wedge support or flat head screwdriver to use as
a wedge