A SERVICE OF

logo

8
Chapter 3: Connecting the Switch
Before You Install the Switch...
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
*A hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A 10Mbps hub connected
to another 10Mbps hub can span up to 100 meters (328 feet).
Before You Install the Switch...
When you choose a location for the Switch, observe the following guidelines:
Make sure that the Switch will be accessible and that the cables can be easily connected.
Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures.
Position the Switch away from water and moisture sources.
To ensure adequate air flow around the Switch, be sure to provide a minimum clearance of two inches
(50 mm).
Do not stack free-standing Switches more than four units high.