A SERVICE OF

logo

Operating Instructions - Maintenance
10.
4-
Maintenance
Table Surface –
The slick melamine coating of the table surface cleans up well
from glue. If you’d like to make the table even more “glue-proof”
we recommend coating the surface with Bates Glue Release
(1-888-363-2628) or Empire Top Saver (1-866-700-5823).
Replacing the table surface can also be completed relatively easily.
Just remove 1” wood screws (11 total) from the mounting holes
found on the backside of the frame as shown in figure 2. We
suggest you shim up the bottom of the new table surface slightly
before reapplying to allow wood chips to fall out of the way.
Optional Screw Gun –
As with any pneumatic tool, you’ll want to add air tool oil to the gun
periodically to keep it operating its best.
Figure 1
Figure 2
Holes in the backside of frame allow
access to table mounting screws.