r
set on
t grille
ystem
ging
n-grip
le
vide
m
c
or
tor/
s
ensed
ment
Undercarriage 1050J WH
Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . track frame with front and rear track guides and sprocket guard; features deep-heat-treated, sealed, and lubricated track
links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; extreme-duty shoes for severe
applications
Track Gauge (standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ft. 2 in. (2180 mm)
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . sealed and lubricated
Track/Carrier Rollers (each side) . . . . . . . . . . . . . . . . . . . . 7/2
Track Chain Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 in. (216 mm)
Sprocket Segments (each side). . . . . . . . . . . . . . . . . . . . . 5
Shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Track Length on Ground . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ft. 5 in. (3175 mm)
Oscillation at Front Idler . . . . . . . . . . . . . . . . . . . . . . . . . . 13 in. (330 mm)
Ground Contact Area
24-in. (610 mm) Grouser Width . . . . . . . . . . . . . . . . . 6,004 sq. in. (38 735 cm
2
)
26-in. (660 mm) Grouser Width . . . . . . . . . . . . . . . . . 6,496 sq. in. (41 910 cm
2
)
28-in. (710 mm) Grouser Width . . . . . . . . . . . . . . . . . 6,998 sq. in. (45 149 cm
2
)
semi-U dozer blade with power tilt U blade with power tilt and
Ground Pressure (with blade) . . . . . . . . . . . . . . . . . . . . .
and mechanical pitch adjustment mechanical pitch adjustment
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.8 psi (95 kPa) 14.0 psi (97 kPa)
26 in. (660 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 psi (88 kPa) 13.1 psi (90 kPa)
28 in. (710 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.0 psi (83 kPa) 12.2 psi (84 kPa)
Serviceability
Sight Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . hydraulic reservoir, final-drive dual-cone seal, and radiator
Refill Capacities*
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171.7 gal. (650 L)
Cooling System with Recovery Tank . . . . . . . . . . . . . . 15.1 gal. (57 L)
Splitter Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 gal. (6 L)
Engine Oil with Filter. . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 gal. (34 L)
Final Drive (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 gal. (19 L)
Hydraulic/Transmission Reservoir and Filter . . . . . . . . 55.5 gal. (210 L)
*Please follow drain and refill procedures and volumes listed in the operator’s manual.
Operating Weights
SAE Operating Weight Includes Standard Equipment,
Semi-U Blade with Trash Rack, 24-in. (610 mm)
Extreme-Service Shoes with Trapezoidal Holes,
Full Fuel Tank, and 175-lb. (79 kg) Operator
. . . . . . . .
80,967 lb. (36 726 kg)
Optional Components
Extreme-Service Shoes With Trapezoidal Holes
24 in. (610 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . in base
26 in. (660 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . 520 lb. (236 kg)
28 in. (710 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . 1,049 lb. (476 kg)
Auxiliary Dual-Function Hydraulic Controls and
Plumbing for Rear Attachments . . . . . . . . . . . . . . 313 lb. (142 kg)
Blade Liner for Semi-U Blade . . . . . . . . . . . . . . . . . . . 1,311 lb. (595 kg)
Pin Puller (hydraulic). . . . . . . . . . . . . . . . . . . . . . . . . . 130 lb. (59 kg)
Powered Cab Air Precleaner System* . . . . . . . . . . . . . 249 lb. (113 kg)
Push Plate for Semi-U Blade. . . . . . . . . . . . . . . . . . . . 798 lb. (362 kg)
Rear Counterweight
With Drawbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,772 lb. (3979 kg)
With Storage Compartment . . . . . . . . . . . . . . . . . 7,714 lb. (3499 kg)
Trash Rack
For Semi-U Blade . . . . . . . . . . . . . . . . . . . . . . . . . 1,104 lb. (501 kg)
For U-Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,184 lb. (537 kg)
Wear Plates for Push Beams. . . . . . . . . . . . . . . . . . . . 752 lb. (341 kg)
*Note: Adds 12 in. (296 mm) to overall tractor height.
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan
Magenta
Yellow Black
6 DKA91050WH Page 17
DKA91050WH_SPECS 4/11/07 10:13 AM Page 17
