IF FURTHER ASSISTANCE IS REQUIRED:
CONTACT STAR/HOLMAN FACTORY SERVICE TEAM AT 1-800-807-9054
4
2. Remove the Crumb Trays from both sides of the oven (daily) as shown below
(DO NOT CLEAN WITH CAUSTIC CLEANERS)
.
3. For lightly soiled conveyor surfaces a damp cloth or scotch pad can be used without
removing the conveyor belt. (daily) For heavily soiled conveyor surfaces refer to the
Preventative Maintenance section for more detailed instruction to remove the
conveyor belt. The belt will need removed for more thorough cleaning.
4. Check air intake area for dust and grease. To clean, vacuum and wipe with a dry
cloth. (daily) Do not spray cleaning fluids into the air intake. This may result in
component failure.
5. Carefully remove and clean the Neo-ceram window. (daily) Remove the
thumbscrews securing the window ring. Remove the window ring, the glass retainer,
and the piece of glass. Wash with hot, soapy water.
WARNING:
THE GLASS THAT IS SUPPLIED WITH THIS OVEN IS SPECIFICALLY
DESIGNED FOR IT. DO NOT SUBSTITUTE ANY OTHER GLASS PRODUCTS IN ITS
PLACE. NEVER OPERATE THE OVEN WITHOUT THE GLASS. NEVER ATTEMPT TO
TOUCH OR REMOVE THE GLASS WHILE THE OVEN IS HOT. ALLOW THE OVEN TO
COOL FOR SEVERAL HOURS BEFORE STARTING THE CLEANING PROCEDURE.
6. Re-assemble unit and check to be sure it is operating properly. If assistance is
required contact the Star/Holman Factory Service Team at 1-800-807-9054 (24
hours/day 7days a week).
