Technical Specifications and Regulatory Statements A-5
Specifications/
Regulatory
A
Accessories
Regulatory Statements
FCC Statement (U.S.A)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference to radio
communications. Operation of this equipment in a residential area is likely to
cause interference in which case the user will be required to correct the
interference at their own expense.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
equipment not expressly approved by the Hewlett-Packard Company, may
cause interference and void the FCC authorization to operate this equipment.
Attaching this product in an FCC Level B product results in an FCC Level A
Composite System as defined in the FCC Rules and Regulations.
The Federal Communications Commission has prepared a booklet titled
Interference Handbook (1986), which may be helpful to you. This booklet
(stock number 004-000-004505-7) may be purchased from the Superintendent
of Documents, U.S. Government Printing Office, Washington, D.C. 20402.
European Community
This equipment complies with CISPR22/EN55022 Class A. This is a Class A
product. In a domestic environment, this product may cause radio interference
in which case the user may be required to take adequate measures.
HP parallel
cables
(IEEE 1284
compatible)
2.0 meter parallel cable (36-pin
Centronics male to DB25 male)
C2950A
3.0 meter parallel cable (36-pin
Centronics male to DB25 male)
C2951A
0Book-asF01.book Page 5 Tuesday, August 14, 2001 2:06 PM
