8-16 HP Jetdirect Configuration Page Messages
UNABLE TO
CONNECT TO
SERVER
Remote Printer mode: The HP Jetdirect print server
was unable to establish an SPX connection with the
print server. Make sure that the print server is running
and that all cables and routers are functioning correctly.
Queue Server mode: The HP Jetdirect print server
could not establish an NCP connection to the file server.
Make sure that the correct file servers are connected.
When multiple file servers are configured, the error is
only displayed on the configuration page if none of the
file servers were successfully connected.
UNABLE TO FIND
SERVER
The HP Jetdirect print server was unable to find the
NetWare print server (Remote Printer mode) or file
server (Queue Server mode). (There was no response
to service queries for advertising print servers or file
servers that matched the configured print server or file
server name.)
Make sure that the print server or file server is running
and that the print server or file server name configured
on the HP Jetdirect print server matches the actual
name used by the print server or file server. Also make
sure that all cables and routers are functioning
correctly.
UNABLE TO GET
NDS SRVR ADDR
The NDS server address cannot be located or
accessed.
Table 8.2 General HP Jetdirect Messages (13 of 15)
Message Description
0Book-asF01.book Page 16 Tuesday, August 14, 2001 2:06 PM
