General Electric 169234 Manual

next previous

OPERATION

Water spray

NOTE: This function can be used anytime and does not have any eect on other

settings. It canbeusedto helpironheavy fabricsordicultareas(collars,pockets,

sleeves, creases, etc). It can also be used when ironing delicate fabrics, which cannot

be steam ironed.

• Filltheironwithwater(

Filling the iron with water).

• Setthetemperature( Setting the temperature).

• Aimthespraynozzle(1) at the garment and then press the spray

button (7).

• A spray of water is emitted from the spray nozzle (1) (ill.

NOTE: The sprayfunctiononlyworkswhenwaterhasbeenlledintothereservoir(12).

Ifthesprayisbeingusedforthersttime,oriftheironhasbeenstandingforsome

time, you may need to press the spray

button (7) a few times to prime the spray

pump before it works correctly.

Steam blast

NOTE: This function provides an extra amount of steam to remove stubborn creases.

For extra stubborn creases, wait a few seconds before pressing the steam blast

button (6) again. We recommend pressing the steam blast button (6) every 2-3

seconds.

NOTE: This function only works when there is water in the water reservoir (12) and the

iron is set for steam output.

• Filltheironwithwater( Filling the iron with water).

• Setthetemperature(

Setting the temperature).

• Pressthesteam blast

button (6).

• A blast of steam is released from the nozzles in the soleplate (15) (ill.

NOTE: The iron might be too hot for some fabrics when using the steam setting.

Iron-169234-04 (GB).indd 9 5/13/10 9:15 AM