Temperature control
1
Choose the control knob for the burner you want to
use.
2
Press down gently and turn the knob anticlockwise to
the high position. You do not need to hold the knob
down.
3
All electrodes will spark until the selected burner
ignites.
Note: For the first burner selected there is a short
delay before the safety valve allows gas to flow to the
cooktop.
4
Adjust the flame anywhere between the High and
the Low positions. Do not adjust the flame between High and Off.
If the cooktop does not light
Check that the cooktop is plugged in and the power is switched on.
Check that the gas is turned on.
Check that the burner parts, including the burner cap, are positioned correctly.
Allow two seconds for the safety valve to open when igniting
the first burner.
A dirty or wet electrode will prevent the burner lighting
efficiently. Clean electrodes with a toothbrush and methylated
spirits.
TITAN MODELS (CG913 Series)
High
Low
Off
Burner
ON
light
Correct assembly Incorrect assembly
Electrode
Burner ring
Burner cap
Electrode
3
