Cooktop part Cleaning Important
Pan supports,
burner caps &
Simmermat
Enamel finish
Hot soapy water and nylon scourer.
Soaking in a solution of biological
clothes washing detergent eg
Drive®
Mild abrasive cleansers eg Jif®
Fume free oven cleaner eg Mr
Muscle®
Heavy duty oven cleaner eg Mr
Muscle®
Always allow cooktop parts to
cool completely before cleaning
them.
Remove spills as soon as the
burner caps are cool to avoid
the soil becoming burnt on.
Burner parts
Hot soapy water.
To clear the holes use a stiff nylon
brush or wire eg straight ended
paper clip.
Mild abrasive cleansers eg Jif®
Reassemble the burner parts
correctly.
Brass wok burner
(Titan CG913 series
only)
Brass cleaner eg Brasso®, Brass Brite® Brass naturally darkens with
heating. The wok burner parts
can be polished back to their
original bright colour but results
will be temporary.
Control knobs
Hot soapy water and a soft cloth
Mild abrasive cleansers eg Jif®
Always apply minimal pressure
with abrasive cleaners.
Stainless steel
exterior
Brushed and
iridium
Soak stains under a hot soapy cloth,
rinse and dry thoroughly
Hard water spots can be removed
with household white vinegar.
Non abrasive stainless steel cleaner
eg Hillmark steelkleen stainless steel
cleaner & polish. Regular use of a
stainless steel polish will reduce
fingerprints and other marks.
Heavy soiling can be removed with
oven cleaner eg Mr Muscle® fume
free or
Mr Muscle® heavy duty.
Never use harsh/abrasive
cleaning agents as they will
damage the stainless steel
finish.
Chlorine or chlorine compounds
in some cleaners are corrosive to
stainless steel and may damage
the appearance of your cooktop.
Check the label on the cleaner
before using.
The graphics are etched onto
the steel by laser and will not
rub off.
Electrodes
Toothbrush and methylated spirits.
A dirty or wet electrode will
prevent the burner lighting
efficiently.
Care and cleaning
13
