A SERVICE OF

logo

Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent
the product from printing.
Do not carry the product by its control panel; this may damage the product.
1. Turn off the product.
2. Wait for the power light to go out, then unplug the power cable.
3. Disconnect any connected cables.
4. Remove all the paper from the product.
5. Close the output tray and paper support.
6. Secure the ink cartridge holder to the case with tape.
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage
your product.
7. Lower the scanner unit.
213