Commands 5-21
• When the LSB is 0, white/black reverse mode is turned off.
• When the LSB is 1, white/black reverse mode is turned on.
GS H
n
[Name] Select printing position of HRI characters
[Format] ASCII GS H
n
Hex 1D 48
n
Decimal 29 72
n
[Range] 0 ≤
n
≤ 3, 48 ≤
n
≤ 51
[Description] Selects the printing position of HRI characters when printing a bar code.
n
selects the printing position as follows:
• HRI indicates Human Readable Interpretation.
GS I
n
[Name] Transmit printer ID
[Format] ASCII GS I
n
Hex 1D 49
n
Decimal 29 73
n
[Range] 1 ≤
n
≤ 3, 49 ≤
n
≤ 51
[Description] Transmits the printer ID specified by
n
as follows:
n
=2, Type ID
n Printing posiition
0, 48 Not printed.
1, 49 Above bar code.
2, 50 Below bar code.
3, 51 Both above and below the bar code.
n Printer ID Specification ID (hexidecimal)
1, 49 Printer model ID TM-H5000/H5000P 0FH
2, 50 Type ID See table below.
3, 51 ROM version ID Depends on ROM version.
Bit Off/On Hex Decimal Function
0 Off 00 0 Two-byte character code not supported.
1 On 02 2 Auto-cutter equipped.
2
Off 00 0 DIP switch 2-2 is set to off.
On 04 4 DIP switch 2-2 is set to on.
