5-2 Commands
[Format] ASCII FF
Hex 0C
Decimal 12
[Description] ➀ Prints the data in the print buffer and ejects the slip paper (when the
slip paper is selected as the print sheet).
➁ In page mode, prints the data in the print buffer collectively and
returns to standard mode.
CR
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Description]
• This command is ignored with a serial interface.
• This command is set according to the DIP switch 1-1 setting at
power-on or resetting the printer with a parallel interface .
CAN
[Name] Cancel print data in page mode
[Format] ASCII CAN
Hex 18
Decimal 24
[Description] In page mode, deletes all the print data in the current printable area.
DLE EOT
n
[Name] Real-time status transmission
[Format] ASCII DLE EOT
n
Hex 10 04
n
Decimal 16 4
n
[Range] 1 ≤
n
≤ 5
Paper Automatic line feed enabled Automatic line feed disabled
Paper roll Functions as same as LF Ignored
Slip paper Functions as same as LF
Prints the data in the print buffer
and does not feed the paper.
