EPSON Stylus Photo R300/R310 Revision A
TROUBLESHOOTING Troubleshooting with LED/LCD Indications and Status Monitor 3 Message 9
1.2 Troubleshooting with LED/LCD Indications and Status Monitor 3 Message
This section describes the LED/LCD indication, the STM3 message and the error condition when the printer detects an error in each operation such as the power on, the paper
loading/feeding and the ink absorption operation.
Table 1-3. LED/LCD Indication and STM3
Printer status
Maintenance
LED indication
LCD indication STM3 message Condition for error detection
Communication Error -- --
This error is detected when the printer cannot
communicate with the PC properly.
Error before Initial Ink
Charge
Blink
Ink Cartridge cannot be recognized.
Yelolow: T0484
For best result, use genuine EPSON
ink.
This error is detected when a defective cartridge
is installed in the printer which the Initial Ink
Filling is not done yet.
