A SERVICE OF

logo

Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 62
A D J U S T M E N T
R E Q U IR E D
When replacing the following parts or components with new
ones, apply specified grease in its adequate dose. (Refer to
Chapter 4 "MAINTENANCE")
Cam, CR, Right/Left
CR Guide Shaft
Holder, Scale, Right/Left
Pulley, Driven Assy.
When having removed or replaced "Carriage Unit" or "CR
Guide Shaft", implement the adjustment in the following order.
(Refer to Chapter 3 "ADJUSTMENT")
1. PG Adjustment
2. First Dot Adjustment
3. PW Sensor Adjustment
4. Head Angular Adjustment (Only "Carriage Unit")
5. Bi-D Adjustment
6. Offset Input for CR Motor Calorific Limitation (When
Replace "CR Guide SHaft")
When having removed or replaced "PW Sensor", implement the
adjustment in the following order. (Refer to Chapter 3
"ADJUSTMENT")
1. PW Sensor Adjustment