Epson Stylus Pro 3800
12/06 Epson Stylus Pro 3800 - 7
Loading Paper Into the Front Manual
Feed Slot
Use the front manual feed slot when you need to print on
thick media (1.2 to 1.5 mm), such as posterboard. Make sure
there is enough space behind the back of the printer for the
paper to feed without obstruction.
Also keep the following in mind when using the front slot:
❏ Load only one sheet at a time and make sure the printable
side is face-up.
❏ If the paper is wider than 16 inches, use the auto sheet
feeder or rear slot if allowed for your paper type; see page 4
for details.
❏ If
PAPER SIZE CHECK is set to OFF on the LCD, you
cannot load paper in the front slot. Use the printer’s menu
system to turn this setting on. (See your
on-screen User’s Guide for more information.)
1. Make sure the printer is on and
READY appears on the
LCD.
2. Press the front cover to release it and open the output tray.
3. Press the front tray as shown to pop it out.
4. Insert a single sheet of paper, short edge first and face-up
into the front tray.
