A SERVICE OF

logo

12
Connecting cable
For the Serial connection, use a cable configured as follows.
If you use a connection with interface conversion connector or interface expanded board,
the operation is not guaranteed.
Select the appropriate connection patterns for each TM printer model (interface
specification) and configure the communication settings of each interface.
Use DIP switch to configure communication settings of the TM printer and the Customer
Display. For more details, see the manuals bundled with the products.
Pass-through (Y) connection
Serial
USB
Modular
Modular
Internal
serial
connection
When using this connection method, first install the TM printer driver.
Then, install the Customer Display driver.
OR