A SERVICE OF

logo

Disassembly and Assembly
Removing the Upper Housing Assembly
1.
Remove the paper guide assembly, ribbon, top cover, front cover, paper eject cover, and tractor
unit. (See page 4-5.)
2.
Remove the panel unit. (See page 4-6.)
3.
Remove the four CBC (M4x15) screws securing the upper housing assembly. (There are only
three screws in the 80-column printer.)
4
Use a small screwdriver to push the two hooks through the cutouts, located on the front cover,
to disengage the hooks from the plates.
Lift up the front side of the upper housing assembly.
5
Remove the upper housing assembly.
Upper Housing Assembly
CBC
(M4X15)
/
\
/
cut
-_
\
Hooks
Screwdriver
Figure 4-6.
Removing the
Upper Housing
Assembly
Note: The figure
above shows the
136column
printer.
4-8
Epson
FX-870/1170