7
Printing from Start to Finish
Here’s what to do to print a basic document—such as a photograph or
newsletter —from loading the paper to selecting print settings to controlling the
print job. Follow the instructions in these sections:
■
“Printing with Windows” below
■
“Printing on a Macintosh” on page 12
If you’re already familiar with EPSON ink jet printing, you can skip ahead
to these sections:
■
“Using PhotoEnhance, Custom, and Advanced Settings” on page 16
■
“BorderFree Printing” on page 20
■
“Printing on Envelopes” on page 32
■
“Using Special Papers” on page 33
■
“Selecting the Correct Media Type” on page 34
Printing with Windows
This section describes the basic steps for printing with Windows.
(To print on a Macintosh, see page 12.)
Loading Paper
Make sure your printer and
computer are turned on.
Place your paper against the
right edge of the sheet feeder
and slide the left edge guide
against the paper. (Don’t
push the paper deeper into
the feeder.)
Load paper only
up to this arrow
Place paper
against the
right edge
Slide left
edge guide
against paper
