Switching Between Continuous Paper and Single
Sheets
When using the tractor, you can easily switch between continuous
paper and single sheets (including envelopes or postcards)
without removing the continuous paper from the tractor.
Switching to single sheets
To switch from continuous paper to single sheets, follow the steps
below.
1. When you have finished printing on continuous paper, press
the
Tear Off/Bin
button to advance the paper to the tear-off
position. (If you selected auto tear-off in the printer’s
default-setting mode or the EPSON Remote! utility, the printer
advances the paper perforation to the tear-off position
automatically.)
2. Tear off the printed pages.
c
Caution:
❑
Always tear off paper before feeding it backwards; feeding
too many sheets backwards can cause a paper jam.
❑
Never feed labels backward with the
Load/Eject
or
Tear Off/Bin
buttons. Labels can easily peel off their
backing and jam the printer. For information on removing
labels from the paper path, see page 3-22.
3. Press the
Load/Eject
button to feed the continuous paper
back to the standby position. The paper is still attached to the
tractor, but no longer in the paper path.
3
R
Adonis Rev.E
A5 size Chapter 3
97/04/07 pass 0
Paper Handling
3-25
