A SERVICE OF

logo

If an incorrect amount of memory is shown on the status sheet,
turn off the printer and review the steps above to make sure
you correctly installed the SIMM. If the amount of RAM is still
incorrect, contact your dealer or a qualified service person for
assistance.
Removing a memory module
1. Perform steps 1 through 7 in the previous section to access the
printer’s RAM slots.
2. Pull the clips on each side of the RAM slot outward to release
the memory module.
3. Grasp both sides of the SIMM and pull it out as shown above.
4. Follow steps 9 through 12 in the previous section to complete
the procedure.
1
2
27-1
L
KTWK Rev.B
Reference Guide
A5 size Chapter 3
’97/12/11 DR, pass 0
3-12
Options