A SERVICE OF

logo

7. Loosen the retaining screws securing the shield cover; then
remove the shield cover.
w
Warning:
Avoid touching the electrical components that are exposed
after you remove the shield cover. They may be very hot if
the printer has been used recently.
c
Caution
:
Before you install the module, be sure to discharge any
static electricity by touching the printer’s shield cover.
Otherwise, you may damage static-sensitive components.
25
2
1
26
R
KTWK Rev.B
Reference Guide
A5 size Chapter 3
’97/12/11 DR, pass 0
Options
3-9