71
E
Main Use and Maintenance
Operations
Removing the fairing
Some parts of the motorcycle fairing have to be removed for
certain maintenance or repair operations.
Warning
If parts that have been removed are not refitted
correctly they may become loose suddenly while riding and
cause you to lose control of your motorcycle.
Important
On refitting the headlamp fairing, always refit the nylon
washers in correspondence with the retaining screws to avoid
damaging the painted parts and the Plexiglas windshield.
Side body panels
Remove the side fairings with the Allen key in the underseat
compartment by undoing:
the two screws (1) securing the body panels to the brackets;
the six screws (2) securing the body panels to the headlamp
fairing;
the four screws (3) securing the body panels to the frame;
the two screws (4) under the panels, which join the right
panel to the left panel;
the two screws (5) securing the body panels to the oil cooler;
the two front screws (6, fig. 58) securing the body panels to
the headlamp fairing.
4
5
1
2
3
fig. 57
